I'm wondering if someone can help me get the trigger on a gen 4 G23 more crisp.
I have a Gen 3 27 and 30S. The (stock) triggers on those are very crisp when you get to the "wall." The Gen 4 has some mushiness there... even when shooting from the trigger reset position. There is just more rearward travel on the trigger than I would like. I installed a smooth trigger Gen 4 trigger bar with no change. I also tried a Gen 3 no-bump trigger bar and it was still mushy. I installed an orange slide plate and compared the cruciform to striker contact of the 3 guns and they are the same.
The connector is a non-marked connector. I'm wondering if the dot connector would change the perceived crispness of the trigger. I understand that the minus connector can change the crispness for the worse due to the shallower angle. Will the dot connector do this also? Since the change in angle is less, would the reduced trigger weight offset any change in how crisp the trigger feels? I'm not sure where to go. I'm not willing to change any springs from stock, though. I'd like to stick to all stock parts and get the crisp feel of the gen 3 (if possible).
Thanks,
Brian
I have a Gen 3 27 and 30S. The (stock) triggers on those are very crisp when you get to the "wall." The Gen 4 has some mushiness there... even when shooting from the trigger reset position. There is just more rearward travel on the trigger than I would like. I installed a smooth trigger Gen 4 trigger bar with no change. I also tried a Gen 3 no-bump trigger bar and it was still mushy. I installed an orange slide plate and compared the cruciform to striker contact of the 3 guns and they are the same.
The connector is a non-marked connector. I'm wondering if the dot connector would change the perceived crispness of the trigger. I understand that the minus connector can change the crispness for the worse due to the shallower angle. Will the dot connector do this also? Since the change in angle is less, would the reduced trigger weight offset any change in how crisp the trigger feels? I'm not sure where to go. I'm not willing to change any springs from stock, though. I'd like to stick to all stock parts and get the crisp feel of the gen 3 (if possible).
Thanks,
Brian
Will dit connector increase crispness of gen 4
0 commentaires:
Enregistrer un commentaire